• Latest
  • Trending
The Right Signal Level for Every Situation

The Right Signal Level for Every Situation

December 3, 2020
Composing for Middle and High School Choirs – A conversation with Laura Farnell and Reginald Writer – Part 1

How Choir Practice Builds Confidence in Middle School Students

July 5, 2025
I Love ASTA!

I Love ASTA!

July 3, 2025
Technology: DAW Bundles

Features You Must Have in a Small Portable USB Audio Interface!

June 28, 2025
Choosing the Right Microphone(s) to Record Your Choral Rehearsal

Choosing the Right Microphone(s) to Record Your Choral Rehearsal

June 28, 2025
Best Budget Microphones for High School Podcasting

Best Budget Microphones for High School Podcasting

June 30, 2025
The Midwest Clinic Announces 2025 Clinicians and Performers

The Midwest Clinic Announces 2025 Clinicians and Performers

June 28, 2025
Running the Race

Running the Race

June 26, 2025
Sharpening the Tools in Your Toolkit

Sharpening the Tools in Your Toolkit

June 24, 2025
Treat Your Ears to Recordings of Upcoming Jazz Charts

Treat Your Ears to Recordings of Upcoming Jazz Charts

June 24, 2025
Several Shades of Green: One Size Does Not Fit All

Several Shades of Green: One Size Does Not Fit All

June 24, 2025
Get Them and Keep Them!

Get Them and Keep Them!

June 24, 2025
Behind the Curtain Tips on Evaluating Music for Your Jazz Ensemble

Behind the Curtain Tips on Evaluating Music for Your Jazz Ensemble

June 24, 2025
Sunday, July 6, 2025
  • Contact
SBO+
  • Departments
    • Choral
    • Concert Band
    • Editorial
      • Advocacy
      • Commentary
      • Features
      • InService
      • MAC Corner
      • MusicEd: Mentor Minute
      • Perspective
      • Upclose
    • Jazz
    • Marching Band
    • Modern Band
    • New Products
    • Orchestra
    • Performance
      • Wind Talkers
      • Percussion
      • GoodVibes
      • Repertoire
      • Playing Tips
    • Technology
    • Theater
    • Tone Deaf Comics
    • Travel/Festivals
      • Fundraising
  • Current Issue
    • Past Issues
  • Awards/Entries
    • Teachers’ Choice Awards
    • 50 Teachers Who Make a Difference
  • Subscribe to SBO+
    • Subscribe
    • Login/Manage Subscription
    • Support
  • Advertise
    • Email PR!
No Result
View All Result
  • Departments
    • Choral
    • Concert Band
    • Editorial
      • Advocacy
      • Commentary
      • Features
      • InService
      • MAC Corner
      • MusicEd: Mentor Minute
      • Perspective
      • Upclose
    • Jazz
    • Marching Band
    • Modern Band
    • New Products
    • Orchestra
    • Performance
      • Wind Talkers
      • Percussion
      • GoodVibes
      • Repertoire
      • Playing Tips
    • Technology
    • Theater
    • Tone Deaf Comics
    • Travel/Festivals
      • Fundraising
  • Current Issue
    • Past Issues
  • Awards/Entries
    • Teachers’ Choice Awards
    • 50 Teachers Who Make a Difference
  • Subscribe to SBO+
    • Subscribe
    • Login/Manage Subscription
    • Support
  • Advertise
    • Email PR!
No Result
View All Result
SBO+
No Result
View All Result

The Right Signal Level for Every Situation

December 3, 2020
in Archives, Technology, December 2020
Share on Facebook

A fundamental of clean audio is setting the right level so there are no overloads. It seems like such an easy concept to those of us who’ve been recording for a while, yet until you get the hang of it, there’s most always some confusion about what works and what doesn’t. Hopefully you’ll never have to think about it again after reading this column today.

Let me boil it all down to this, and then I’ll give you the behind-the-scenes explanation. Red is bad; green is good. Yep, that’s all it comes down to. If you can make sure that there are no red overload indicators that are lit anywhere in the signal path, then your audio is going to be clean.

“I already knew that!” you’re probably saying about now. Probably the more accurate question is, “So how much into the green level should the meter indicate?” In other words, what’s the correct meter reading?

ADVERTISEMENT

It’s All About Noise

There’s a duality in the answer here. If you’re using a piece of analog audio gear like a preamp or mixer, then you want to make sure that you’re getting a good healthy signal that’s close to the red overload (or 0VU if you’re using the old analog VU meters from yesteryear) but not touching it. The reason is noise, or more accurately, what’s known as the noise floor.

All analog electronics generate noise just by the fact that electrons are flowing through the components. Well-designed (and more expensive) analog circuits generally have a low noise floor, so they generate less noise, while inexpensive analog circuits usually are a lot noisier. But what does that mean, exactly?

Imagine that you’re outside in your yard taking notes on what to buy for your garden. Your grass hasn’t been cut a quite a while so it’s pretty high. If you drop your pen, it disappears into the grass and you have a hard time finding it because the grass is higher than the pen. The grass is the self-noise of the circuit and the pen is the signal you’re generating, let’s say from a microphone. That means you’ll hear a lot of noise along with your signal.

If the grass is freshly cut, you see the pen easily, therefore you won’t hear the noise as much. But let’s say you have the powers of levitation. You point to the pen and it raises off the grass – 6 inches, a foot, 3 feet. The grass (noise) stays at the same height, but the pen (the microphone level) gets higher into the air. In other words, the louder above the noise floor your signal is, the less you’ll hear the noise. That’s why we always try to boost the signal up as far as we can without it overloading in the analog world. In the digital world we no longer have those limitations, however. There are no electrons pulsing through analog components so there’s no noise generated. That means we can record at just about any level below 0dB Full Scale (FS – the highest level before an overload occurs) and we’re fine, since the signal won’t have to compete with the noise. Practically speaking though, we’d like to aim for around -10dB on the meter to make sure that there’s some headroom in case there’s a sudden peak that comes along.

ADVERTISEMENT

In the Real World

For recording, we have some time to set things up and make sure all the levels are right where they should be, but what about situations like live streaming on Zoom, Teams, or Skype? Yes, the signal path after your microphone and microphone preamp is digital, but the best thing is to treat the live stream as if it were analog. That is, aim for the hottest level you can get without creating an overload (in other words, no red overload indicators anywhere).

ADVERTISEMENT

The reason is that you want a nice hot signal going down your internet pipe so no one has trouble hearing you on the other end. We’ve all been on one of those live-streaming sessions or conference calls where that one person is so quiet that you have to strain to hear what they’re saying. Besides the fact that a low volume level can be annoying, your sense of authority is lessened, which can be a factor when it comes to things like controlling your class or making a presentation.

The bottom line is that setting the right signal levels doesn’t have to be that difficult. Stay away from overloads, make it loud enough to get above the noise, and everyone will be smiling.

Producer/engineer Bobby Owsinski is one of the best-selling authors in the music industry with 24 books that are now staples in audio recording, music, and music business programs in schools around the world, Visit Bobby’s website at bobbyowsinski.com.

 

You may also like:

Understanding Mixers and the Signal Path Planning Checklist for Recording Your Band Default ThumbnailDigital Recording Automatic Accompaniment Generators Default ThumbnailAudio Tools for Music Educators: Noise Cleaning Audio Enhancements Default ThumbnailNoise Exposures in School Music Classes and Marching Band Rehearsals
Please login to join discussion
Next Post

Winter is Coming: Prepare Your Fleet!

  • July 2025

    Articles | Digital Issue
  • June 2025

    Articles | Digital Issue
  • May 2025

    Articles | Digital Issue
  • April 2025

    Articles | Digital Issue
  • March 2025

    Articles | Digital Issue
© 2005 - 2025 artistpro, LLC
7012 City Center Way, Suite 207
Fairview, Tennessee 37062
(800) 682-8114

No Result
View All Result
  • Departments
    • Choral
    • Concert Band
    • Editorial
      • Advocacy
      • Commentary
      • Features
      • InService
      • MAC Corner
      • MusicEd: Mentor Minute
      • Perspective
      • Upclose
    • Jazz
    • Marching Band
    • Modern Band
    • New Products
    • Orchestra
    • Performance
      • Wind Talkers
      • Percussion
      • GoodVibes
      • Repertoire
      • Playing Tips
    • Technology
    • Theater
    • Tone Deaf Comics
    • Travel/Festivals
      • Fundraising
  • Current Issue
    • Past Issues
  • Awards/Entries
    • Teachers’ Choice Awards
    • 50 Teachers Who Make a Difference
  • Subscribe to SBO+
    • Subscribe
    • Login/Manage Subscription
    • Support
  • Advertise
    • Email PR!

© 2005 - 2024 artistpro, LLC 7012 City Center Way, Suite 207 Fairview, Tennessee 37062 (800) 682-8114

Wenger EndurAd Promo